Permanent NdFeB Magnet Stepped Cube Blocks Electroplated Zinc
Permanent/Strong Block/Rectangular/Cuboid shape Neodymium NdFeB magnet
Superior High Ambient Temperature, <150 celsius degrees
Grade: N30SH/N33SH/N35SH/N38SH/N40SH/N42SH/N45SH/N48SH
NdFeB Magnet, <150°C, thickness magnetized, plated Zn,
Block | N35SH | L11 x W6 x T6 mm | 4128Gs 4.02Lbs
Block | N35SH | L13 x W6 x T6 mm | 4052Gs 4.58Lbs
Block | N35SH | L16 x W6 x T6 mm | 3959Gs 5.38Lbs
Block | N35SH | L19 x W6 x T6 mm | 3890Gs 6.17Lbs
Block | N35SH | L22 x W6 x T6 mm | 3838Gs 6.96Lbs
Electroplating: Nickel/Epoxy/Zinc/Imitation Gold/18K Gold optional
Magnetizing: Thickness/Diametrical optional
Attach with: 3M VHB 4905/4910/Foam 1600T Adhesive optional
Laser Engrave logo: optional
Permanent NdFeB Magnet Stepped Cube Blocks Electroplated ZincSpplier of Rare Earth Magnet, neodymium magnets and permanent magnets
Our magnetic product assortment includes: disc magnets, ring magnets, magnetic spheres, block magnets, pot magnets, clamping magnets, car roof magnets, ceiling magnets, switching magnets, lifting magnets, flexible rubber magnets, sheet magnets, tape magnets, steel tape, notice boards, notice board magnets, magnetic paper, fridge magnets, business card conversions, magnetic sweepers, magnetic separation rod magnets, separator grids, compasses, gaussmeters, magnetic viewing film, iron filings, experiment kits, generator magnets, reed switch magnets, educational magnets.
At HSMAG we also supply a range of unusually shaped Neodymium Magnets. Arc, Trapezoid, Elliptical, Segment, Ingot or Blocks with or without holes are available. These uncommon shapes find applications in specialized medical resonance equipment, aerospace, communications, electrical engineering, sensors, rotors, turbines, computers, automobile components and digital audio equipment.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. HSMAG Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don’t carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the “M” prefix after the grade has an operating temperature 100 degrees. After this the grades are “H”, “SH”, “UH” & “EH”. In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
Ferrite Channel Magnets 26 x 23 x 6.3mm thick x 3mm hole
Ceramic Channel Pot Flat Rectangular Fasten Magnet
Ceramic C5 Adhesive Channel Magnet for Latches and Catches
Ferrite Rectangular Base Magnet Channel Assembly
Colour Zinc Plated Steel Ferrite Mount Box Magnet
Tiny Small Round Neodymium Disk Magnets N42 Zn-Plated Dia 1.5x1mm
1″ Length Ferrite Rectangle Channel Pot Magnet with Hole
Neodymium Micro Circular Magnet Diameter 1×0.5mm
Permanent Hard Ferrite Channel Latch Magnet 43mm